Factory Cart Corner Stake Brackets

Set of 4 genuine antique factory cart corner stake brackets- two for the left and two for the right. Thick cast iron.

Cleaned- soaked in degreaser and scrubbed with wire brush to remove dirt, grime, and loose rust. Ready for installation with their luscious patina or application of a painted finish.

Check them out on my website, along with all my other antique and vintage industrial caster and wheel offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Small Antique Furniture Casters

Full set of 4 antique swivel casters- Model No. 5 by Payson Manufacturing Company of Chicago, dated May 1, 1877. Exceptionally rare, large size. Cast iron with hardwood wheels to be kind to your flooring. Small circular mounting plate make these ideal for secure mounting to slim furniture legs.

• Will raise your piece 2 3/4 inches
• 1 3/4 inch diameter wheels in a 2 5/8 inch wide wheel assembly
• 2 1/16 inch diameter mounting plates with 3 mounting holes
• Includes new wood mounting screws

Great operational condition. Cleaned- soaked in degreaser, then carefully hand scrubbed to remove dirt, loose rust and grime, being careful to not disturb remaining original copper-colored finish (rare for it to remain intact). Wood conditioner applied. Moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Small Antique Furniture Casters

Full set of 4 antique swivel casters- Model No.2 by Tucker Manufacturing Company of Indianapolis, IN, dated August 17, 1886. Cast iron with hardwood wheels to be kind to your flooring. Small mounting plate make these ideal for secure mounting to slim furniture legs. These are small, light duty casters I recommend only for a fairly lightweight piece (100-150 lbs?) that would not see heavy use.

• Will raise your piece 1 1/2 inches
• 1 inch diameter wheels in a 1 3/8 inch wide wheel assembly
• 1 1/8 x 1 5/8 inch mounting plates
• Includes new wood mounting screws

Great operational condition. Cleaned- soaked in degreaser, then carefully hand scrubbed to remove dirt, loose rust and grime, being careful to not disturb remaining original copper-colored finish (rare for it to remain intact). Wood conditioner applied. Moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Small Antique Furniture Casters

Set of 4 antique swivel casters of cast iron with hardwood wheels to be kind to your flooring. Small circular mounting plate make these ideal for slim furniture legs. Unmarked, but belived to be by the Payson Manufacturing Company of Chicago, circa 1877.

• Will raise your piece 1 1/2 inches
• 1 inch diameter wheels in a 1 5/8 inch wide wheel assembly
• 1 1/4 inch diameter mounting plates with 3 mounting holes
• Includes new wood mounting screws

Great operational condition. Cleaned- soaked in degreaser, then carefully hand scrubbed to remove dirt, loose rust and grime, being careful to not disturb remaining original copper-colored finish (rare for it to remain intact). Wood conditioner applied. Moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Wheels

Set of four EXTRA LARGE cast iron industrial casters- the super-rare Model No.112 by Payson Manufacturing Company of Chicago, IL. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces.

• 4 3/4 inch overall height
• 3 1/2 inch diameter wheels in 4 inch wide wheel assembly
• 3 1/2 x 5 inch mounting plates
• 5 lbs each

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Wheels

Set of 4 heavy duty cart wheels of thick cast iron.

• 3 7/8 inch diameter

Great structural condition with as-found pitted and oxidized patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Casters

Set of four 1800s' industrial casters. Cast iron construction with original black painted finish. These are ‘rigid’ or ‘fixed’ casters, meaning they roll from side to side, but do not swivel. Exceptionally rare…have never seen this design in the decades I’ve been specializing in antique industrial casters. Love the 1800s’ raised numeral on the wheels and mounting plates.

• 4 3/4 inches from floor to the top of the mounting plate (will raise your piece this amount)
• 4 inch diameter, 1/4 inch wide wheels
• 1 7/8 x 2 1/8 inch mounting plates

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Casters

Art Deco set of 4 vintage industrial swivel casters. Model #6 by The Hamilton Caster & Manufacturing Company of Hamilton, OH, dated February 5, 1921.

• 2 3/4 inch overall height
• 2 1/4 inch wheels in a 2 3/8 inch wide wheel assembly
• 1 7/8 x 2 7/8 inch mounting plates

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Casters

Set of four extra large, heavy duty cast iron industrial casters. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces. By Hamilton Caster & Manufacturing Company of Hamilton, OH, dated 1903.

• 4 inch overall height
• 3 inch diameter wheels in 3 1/2 inch wide wheel assembly
• 3 1/8 x 4 1/2 inch mounting plates
• 3 1/2 lbs each

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Caster Wheels

Art Deco set of 4 vintage industrial swivel casters. Model #6 by The Hamilton Caster & Manufacturing Company of Hamilton, OH, dated 1906.

• 2 3/4 inch overall height
• 2 1/4 inch wheels in a 2 3/8 inch wide wheel assembly
• 1 7/8 x 2 7/8 inch mounting plates

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Caster Wheels

Set of four industrial stem casters from very early 1900s. Very rare! Cast iron forks. Pressed steel wheels with rubber tread. Stem is ideal for narrow table or cabinet legs.

• 7 1/2 inches from floor to the top of the forks (will raise your piece this amount)
• 7 inch diameter, 3/4 inch wide wheels
• 2 inch long, 3/4 inch diameter stems

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Cast Iron Gear

Cast iron gear from the very early 1900s. 2 available.

Spectacular condition! I believe this to be unused new old stock- teeth show no signs of wear, no machinery grease or grime, most of original black paint intact with light oxidation. Two in exact same amazing condition found together, so perhaps in storage for the past 120 years.

Check it out on my website, along with all my other antique and vintage industrial decor offerings. And be sure to follow Iron Anarchy on Instagram to keep updated on the latest offerings!

Antique Sliding Industrial Fire Barn Door Rollers Hangers, Allith 1903

Super-rare antique pair of MASSIVE, EXTRA HEAVY DUTY door rollers…fire door hangers model #6 by Allith, dated 1903. Upper and lower wheels: upper has bearings for smooth rolling, while lower wheel prevents derailing or binding.

• 21 inches tall
• 7 1/2 inches wide
• Each weighs 10 1/2 lbs

Cleaned- scrubbed with degreaser to remove dirt, grime and loose rust, leaving a clean aged patina with worn silver paint. Appear to be in great operational and structural condition with no chips/cracks or detrimental issues. Wheels roll nicely. Ready for installation or coat of paint.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Caster Wheels

Set of four 1800s' industrial stem casters. Very rare! Heavy duty, thick cast iron construction. Small mounting plate and long stem are ideal for secure attachment to table or cabinet legs.

• 5 1/8 inches from floor to the top of the mounting plate (will raise your piece this amount)
• 4 inch diameter, 1 inch wide wheels
• 2 7/8 inch square mounting plates with 1 5/8 inch long, 1 inch thick stems

Great operational and structural condition. Exceptional cosmetic condition with most of original black paint intact. Have been soaked in degreaser, then scrubbed with wire brushes to remove grime and loose rust, leaving a luscious aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Industrial Kitchen Island Casters

Set of four extra heavy duty casters. These are new casters with 1934 design Art Deco cast iron wheels from Bond Foundry of Manheim, PA in pressed steel forks with a worn black painted finish. Each swivel caster has 2 raceways of ball bearings to best handle both horizontal and vertical stress. So, expect premium performance.

• 4 1/2 inch overall height
• 3 inch diameter, 1 1/2 inch wide wheels
• 2 3/4 x 3 3/4 inch mounting plates
• 3 1/2 lbs each
• 250 lb load rating per caster

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Factory Cart Corner Stake Brackets

Set of 4 genuine antique factory cart corner stake brackets- two for the left and two for the right. Thick cast iron.

Cleaned- soaked in degreaser and scrubbed with wire brush to remove dirt, grime, and loose rust. Ready for installation with their luscious patina or application of a painted finish.

Check them out on my website, along with all my other antique and vintage industrial caster and wheel offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Caster Wheels

Set of 4 heavy duty swivel casters of thick steel. Model 100-3 by Faultless Caster Company, USA.

• 3 3/4 inch overall height
• 3 inch diameter, 1 1/8 inch wide wheels
• 3 1/8 x 4 1/8 inch mounting plates

Great operational and structural condition. Soaked in degreaser, then hand scrubbed to remove dirt and grime, leaving a clean, aged patina. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Casters

Set of 4 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company. Two sets of 4 available.

• 3 1/8 inch overall height.
• 2 1/2 inch wheels with 1 inch face.
• 2 3/4 inch x 3 3/4 inch mounting plates.
• Great operational condition.
• Gently refurbished- soaked in degreaser and factory grime and loose rust scrubbed away, moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Factory Cart Wheels

Set of 4 cast iron cart wheels. Light duty.

• 10 inch diameter
• 3/4 inch wide
• 15/16 inch axle bore in 1 3/4 inch long hub

Great structural condition with as-found oxidized patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Casters

Cleaned set of four cast iron swivel casters in rare double-wheel design, and EXTRA RARE rubber tread to be kind to your flooring (I come across a set every 4 years or so)….one of the very first casters with rubber. By Phoenix Caster Company of Indianapolis, IN, circa 1910s.

• 3 inch overall height
• 2 inch diameter wheels
• 3 3/4 inch wide forks
• 2 1/2 x 3 1/2 inch mounting plates
• 12 wood mounting screws included

Great operational and structural condition. Rubber does show wear and flat spots from sitting for decades in one position, but this doesn’t seem to impede their rolling ability.

Cleaned: soaked in degreaser and scrubbed with wire brushes to remove factory grime and loose rust, leaving a clean aged patina. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!