cast iron wheels

Vintage Industrial Factory Cart Caster Wheels

Set of 4 heavy duty swivel casters of thick steel with an aged patina.

• 3 1/4 inch overall height
• 2 1/2 inch diameter, 1 inch wide wheels
• 2 3/4 x 3 7/8 inch mounting plates
• 200 lb. load rating per caster

Great operational and structural condition. Scoured with power wire brushes to remove thick rust, then hand washed, leaving a luscious clean, aged patina. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Industrial Kitchen Island Caster Wheels

Super rare 1930s’ Art Deco set of 4 extra heavy duty swivel casters of extra thick cast iron. Corner mounting brackets could be placed on inside or outside corners of a furniture leg or cabinet base, depending on your preference. By Bond Foundry of Manheim, PA.

• Will raise your piece 3 3/4 inches
• 2 1/2 inch diameter, 1 inch wide wheels
• Corner mounting plate measures 2 1/2 inches tall, 1 1/4 inches on each side
• Each weighs 3 lbs.

Great structural and operational condition. Scoured with power wire brushes to remove thick oxidation, then soaked in degreaser and scrubbed to remove dirt and grime, leaving an aged patina. Additional cleaning may be required per your aesthetic.

Check them out on my website, and be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage caster offerings!

Vintage Industrial Factory Cart Kitchen Island Caster Wheels

Set of four large cast iron industrial casters- Model No.10 by Phoenix Caster Company of Indianapolis, IN, circa very early 1900s. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces.

• 4 inch overall height
• 3 inch diameter wheels in 3 3/4 inch wide wheel assembly
• 3 1/4 x 4 1/4 inch mounting plates

Refurbished- scoured with power wire brushes to remove thick rust, soaked in degreaser then hand scrubbed with wire brushes to remove loose rust and factory grime, leaving a luscious aged patina. Great operational and structural condition. Moving parts lubricated. Ready for installation.

Check them out on my website, and be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage caster offerings!

Vintage Industrial Factory Cart Kitchen Island Caster Wheels

Set of four extra heavy duty casters of thick cast iron by Bond Foundry of Manheim, PA. This is their iconic 1934 Art Deco design that was re-issued in 2002 (this date is on the wheel). Each swivel caster has 2 raceways of ball bearings (one inside the other) to best handle both horizontal and vertical stress. So, expect premium performance.

• 5 inch overall height
• 3 1/2 inch diameter, 1 1/2 inch wide wheels
• 3 7/8 x 4 3/4 inch mounting plates
• 275 lb load rating per caster
• 6 lbs each

Great operational and structural condition. As-found rusty patina.

Check them out on my website, and be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage caster offerings!

Vintage Industrial Factory Cart Kitchen Island Caster Wheels

Set of four large, extra heavy duty swivel casters. Cast iron wheels in thick steel forks. Roller bearings in wheel axle and two ball bearing raceways (one inside the other to better handle both vertical and horizontal stresses) for high performance. These are what you need for that kitchen island or large cabinet project! 1940s’ era by Rapistan Company of Grand Rapids, MI. Worn original Rapistan-green paint

• 6 5/8 inch overall height
• 5 inch diameter, 1 3/4 inch wide wheels
• 4 x 5 inch mounting plates
• 9 1/2 lbs each

Great operational and structural condition. Soaked in degreaser and scrubbed of their heaviest factory grime and loose rust, but may need additional cleaning since there is still rust and dirt.

Check them out on my website, and be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage caster offerings!

Vintage Industrial Factory Cart Caster Wheels

Set of 4 heavy duty industrial casters- the iconic Model 361 by Bassick Caster Company. Aged patina.

• 3 5/8 inch overall height.
• 3 inch wheels with 1 1/8 inch face.
• 3 1/8 inch x 4 1/8 inch mounting plates.
• Good operational condition.
• Cleaned- soaked in degreaser; factory grime and loose rust scrubbed away; may require more cleaning per your aesthetic. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Industrial Factory Cart Caster Wheels

Set of 4 heavy duty industrial casters- the iconic Model 261 by Bassick Caster Company. Aged patina of worn black paint.

• 3 1/8 inch overall height.
• 2 1/2 inch wheels with 1 inch face.
• 2 3/4 inch x 3 3/4 inch mounting plates.
• Great operational condition.
• Gently refurbished- soaked in degreaser; factory grime and loose rust scrubbed away; moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Caster Wheels

4-caster set of heavy duty swivel casters of thick steel. Model 100-3 by Noelting Faultless Caster Company, USA, circa 1930s.

• 3 1/2 inch overall height
• 3 inch diameter, 1 5/16 inch wide wheels
• 3 1/8 x 4 1/8 inch mounting plates

Great operational, structural and cosmetic condition. Soaked in degreaser to remove factory grime, then scoured with power wire brushes to remove oxidation, leaving a clean, aged patina. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Caster Wheels

Art Deco set of 4 vintage industrial swivel casters. Model #6 by The Hamilton Caster & Manufacturing Company of Hamilton, OH, dated March 27, 1906.

• 2 3/4 inch overall height
• 2 1/4 inch wheels
• 2 3/8 inch wide wheel assembly
• 1 7/8 x 2 7/8 inch mounting plates
• Includes wood mounting screws

Very good operational and structural condition with a very distressed patina. Scoured with power wire brushes to remove thick rust, leaving some oxidation to retain their antique patina. Iron is very worn; pitted in some areas. A very rustic “man cave” patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Wheels

Set of 4 heavy duty cart wheels of thick cast iron. Circa 1930s.

• 8 inch diameter
• 1 7/8 inch tread width
• 3/4 inch axle bore
• 2 3/8 inch hub length
• 5 1/2 lbs each

Great structural condition with no chips, cracks, repairs. Remnants of original black paint with oxidation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Industrial Kitchen Island Casters

Set of four large heavy duty swivel casters. Cast iron wheels with thick steel forks. Worn original paint. 1950s era. These are what you need for that kitchen island or large cabinet project! Roller bearings in wheel axle and two ball bearing raceways (to better handle both vertical and horizontal stresses).

• 6 inch overall height
• 5 inch diameter, 1 1/2 inch wide wheels
• 4 x 4 1/2 inch mounting plates

Great operational and structural condition. Cleaned- soaked in degreaser and scrubbed of factory grime and loose rust; may need additional cleaning per your aesthetic.

Check them out on my website, and be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage caster offerings!

Antique Industrial Factory Cart Cast Iron Caster Wheels

Shop Iron Anarchy store for rare and unique antique industrial factory cart casters and antique furniture casters.

Since 2010, Iron Anarchy has been your source for rare, curated collections of antique industrial casters and antique furniture casters with dynamic styling.

My specialty is casters from the 1870s to 1930s when aesthetics still played an important role in caster design. My industrial offerings usually feature ornate spoked wheel designs and eye-catching raised text. My antique furniture casters feature coveted early American design innovations and wheels of wood, iron, porcelain and glass.

Check them out on my website, and be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage caster offerings!

Antique Industrial Factory Cart Cast Iron Caster Wheels

Matched set of 4 antique swivel industrial casters. Large and heavy duty. Cast iron with as-found aged patina. Model No. 190 by Payson Caster Company of Chicago, IL, circa late 1800s/early 1900s.

• 4 1/2 inch overall height
• 3 inch diameter, 1 3/8 inch wide wheels
• 3 1/2 x 4 7/8 inch mounting plates

Great operational condition. As-found patina with rust and dirt.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Wheels

Set of four extra large, heavy duty swivel casters. Cast iron wheels with thick steel forks. Remnants of worn original dark green paint. 1960s era. These are what you need for that kitchen island or large cabinet project! Roller bearings in wheel axle and two ball bearing raceways (to better handle both vertical and horizontal stresses).

• 7 1/4 inches overall height
• 6 inch diameter, 1 1/2 inch thick wheels
• 4 x 4 1/2 inch mounting plates

Great operational and structural condition. Cleaned: soaked in degreaser, then scrubbed to remove thick factory grime and loose rust, leaving aged patina; may need additional cleaning per your aesthetic.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Industrial Casters With Brakes

Set of four medium duty, swivel casters with brakes. Black plastic wheels in steel forks with a worn vintage painted finish. By Noelting-Faultless Caster of Evansville, Indiana, circa 1970s.

• 4 inch overall height
• 3 inch diameter, 7/8 inch wide wheels
• 2 1/4 x 2 7/8 inch mounting plates

Great operational and structural condition with no issues. Gently refurbished- soaked in degreaser, then scrubbed to remove factory grime. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Caster Wheels

Set of four large antique factory cart swivel casters by Phoenix Caster Company of Indianapolis, IN, circa late 1800s.

• 5 1/2 inch overall height
• 4 inch diameter, 1 3/8 inch wide wheels
• 3 9/16 x 4 1/2 inch mounting plates

Very good operational and structural condition. Cleaned- soaked in degreaser, then scrubbed with wire brush and abrasive pad to remove factory grime and loose rust, leaving an aged oxidized patina that may require further cleaning per your aesthetic.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Wheels

Set of four EXTRA LARGE cast iron industrial casters- the super-rare Model No.112 by Payson Manufacturing Company of Chicago, IL. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces.

• 4 3/4 inch overall height
• 3 1/2 inch diameter wheels in 4 inch wide wheel assembly
• 3 1/2 x 5 inch mounting plates
• 5 lbs each

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Cast Iron Wheels

Set of 4 heavy duty cart wheels of thick cast iron.

• 3 7/8 inch diameter

Great structural condition with as-found pitted and oxidized patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Factory Cart Wheels

Set of 4 cast iron cart wheels. Light duty.

• 10 inch diameter
• 3/4 inch wide
• 15/16 inch axle bore in 1 3/4 inch long hub

Great structural condition with as-found oxidized patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Wheels

Matched pair of rare 1800s' wheels in an ornate clover-leaf spoke design. Heavy duty, thick cast iron.

• 12 inch diameter
• 2 inch tread
• 15 lbs each

As-found condition with heavy rust and pitting.

FREE US shipping.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!