Antique Industrial Stem Casters

1930s’ set of 4 heavy duty swivel stem casters. Thick cast iron wheels in steel forks. Ball bearing swivel mechanism under top plate. Although the threaded stem was designed to be bolted to a factory cart, today it’s ideal for mounting to slim table legs (an extremely rare configuration for such a heavy duty antique caster). By The Colson Company of Elyria, Ohio.

• Will raise your piece 4 1/2 inches
• 3 1/2 inch diameter, 1 1/4 inch wide wheels
• 2 inch long, 3/4 inch diameter stem on 2 5/8 inch diameter mounting plate

Great structural and operational condition. Cleaned- soaked in degreaser and scrubbed to remove thick factory grime and loose rust, leaving a clean, but aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Industrial Kitchen Island Casters

Set of four extra heavy duty casters. These are new casters with 1934 design Art Deco cast iron wheels from Bond Foundry of Manheim, PA in pressed steel forks with a worn black painted finish. Each swivel caster has 2 raceways of ball bearings to best handle both horizontal and vertical stress. So, expect premium performance.

• 4 1/2 inch overall height
• 3 inch diameter, 1 1/2 inch wide wheels
• 2 3/4 x 3 3/4 inch mounting plates
• 3 1/2 lbs each
• 250 lb load rating per caster

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Caster Wheels

Set of 4 heavy duty swivel casters of thick steel. Model 100-3 by Faultless Caster Company, USA.

• 3 3/4 inch overall height
• 3 inch diameter, 1 1/8 inch wide wheels
• 3 1/8 x 4 1/8 inch mounting plates

Great operational and structural condition. Soaked in degreaser, then hand scrubbed to remove dirt and grime, leaving a clean, aged patina. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Casters

Set of 4 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company. Two sets of 4 available.

• 3 1/8 inch overall height.
• 2 1/2 inch wheels with 1 inch face.
• 2 3/4 inch x 3 3/4 inch mounting plates.
• Great operational condition.
• Gently refurbished- soaked in degreaser and factory grime and loose rust scrubbed away, moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Factory Cart Casters

Cleaned set of four cast iron swivel casters in rare double-wheel design, and EXTRA RARE rubber tread to be kind to your flooring (I come across a set every 4 years or so)….one of the very first casters with rubber. By Phoenix Caster Company of Indianapolis, IN, circa 1910s.

• 3 inch overall height
• 2 inch diameter wheels
• 3 3/4 inch wide forks
• 2 1/2 x 3 1/2 inch mounting plates
• 12 wood mounting screws included

Great operational and structural condition. Rubber does show wear and flat spots from sitting for decades in one position, but this doesn’t seem to impede their rolling ability.

Cleaned: soaked in degreaser and scrubbed with wire brushes to remove factory grime and loose rust, leaving a clean aged patina. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Kitchen Island Casters

Set of four Art Deco extra heavy duty swivel casters- Series 3-A by Bond Foundry of Manheim, PA, dated 1934. Extra thick cast iron with remnants of old gray paint.

• 5 1/4 inch overall height
• 4 inch diameter, 1 1/2 inch wide wheels
• 3 3/4 x 4 3/4 inch mounting plates
• 6 1/2 lbs each
• 300 lb load rating per caster per original catalog entry

Great operational and structural condition with no issues. Gently refurbished- soaked in degreaser, then scoured with wire brushes to remove factory grime and loose oxidation, leaving a luscious aged patina. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Industrial Kitchen Island Casters

Set of four EXTRA LARGE, extra heavy duty swivel casters- model C46-06 by The Nutting Truck and Caster Company of Fairbault, Minnesota, circa 1960s. Extra thick cast iron wheels in thick, hand-forged steel forks. Two concentric ball bearing raceways to better handle both vertical and horizontal stresses for optimum performance. Roller bearings in wheel hub for smooth rolling.

• 7 1/2 inch overall height
• 6 inch diameter, 2 inch wide wheels
• 5 x 5 1/2 inch mounting plates
• 900 lb load rating per caster per original catalog entry; please consider their current age and wear.

Good operational and structural condition. Have received a cursory cleaning- soaked in degreaser, then scrubbed with scouring pads and wire brushes to remove loose rust, dirt and factory grime. Remnants of original green paint with extensive oxidation, crusty paint, overspray, etc….far from pristine for that ultra-mancave effect. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Casters, Vintage Industrial Caster Wheels

1900s’ set of 4 industrial swivel casters in an Art Deco style. Unused new old stock! Two concentric ball bearing raceways to better handle both vertical and horizontal stresses. Model #6 by the American Caster & Manufacturing Company of Hamilton, OH…later to become Hamilton Caster & Manufacturing Company in the 1920s.

• Will raise your piece 3 inches
• 1 3/4 inch diameter, 7/8 inch wide wheels
• 2 x 3 inch mounting plates
• Includes wood mounting screws

Pristine operational, structural and cosmetic condition. Scoured with power wire brushes to remove light dirt, leaving a luscious aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Stem Casters

1920s’ set of 4 heavy duty swivel stem casters. Thick cast iron wheels in steel forks. Ball bearing swivel mechanism under top plate. Although the threaded stem was designed to be bolted to a factory cart, today it’s ideal for mounting to slim table legs (an extremely rare configuration for such a heavy duty antique caster). By The Colson Company of Elyria, Ohio.

• Will raise your piece 4 1/2 inches

• 3 1/2 inch diameter, 1 1/4 inch wide wheels

• 2 inch long, 3/4 inch diameter stem on 2 5/8 inch diameter mounting plate

Great structural and operational condition. Refurbished- soaked in degreaser and scrubbed with wire brushes to remove thick factory grime, leaving a clean, but aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Caster Wheels

Set of 4 heavy duty cast iron casters. Rigid style (roll back and forth; not swiveling). Khaki green wrinkle painted finish, so possible WWI era.

• Will raise your piece 3 inches
• 2 1/2 inch diameter, 5/8 inch wide wheels
• 1 1/8 x 4 inch mounting area with 2 mounting holes

Great structural and operational condition. Cleaned- soaked in degreaser, then scrubbed, leaving clean, but very aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Kitchen Island Casters

Refurbished set of four large swivel casters in rare double-wheel design- Rol-Ezy-Chief 300 by Currie Manufacturing Company of Chicago, IL, dated February 12, 1924. Extra heavy duty thick cast iron.

• 4 1/2 inch overall height
• 3 inch diameter wheels
• 3 3/4 inch wide forks
• 2 7/8 inch x 4 3/8 inch mounting plates

Great operational, structural and cosmetic condition. Scoured with power wire brushes to remove all oxidation; soaked in degreaser and scrubbed to remove all factory grime. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Caster Wheels

Set of 4 heavy duty swivel casters of thick steel. Model 100-3 by Faultless Caster Company, USA.

• 3 3/4 inch overall height
• 3 inch diameter, 1 1/8 inch wide wheels
• 3 1/8 x 4 1/8 inch mounting plates

Great operational and structural condition. Soaked in degreaser, then hand scrubbed to remove dirt and grime, leaving a clean, aged patina. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Kitchen Island Casters

Set of four LARGE, extra heavy duty swivel casters by Service Caster & Truck Company of Albion, MI, dated 1917. Great Art Deco styling! Extra thick cast iron. Two concentric ball bearing raceways to better handle both vertical and horizontal stresses for optimum performance. These are what you need for that kitchen island project!

• 5 1/2 inch overall height
• 4 inch diameter, 1 1/2 inch wide wheels
• 4 x 5 inch mounting plates
• 7 lbs each

Great operational and structural condition. Refurbished- scoured with power wire brushes to remove the bulk of rust, and washed, leaving a luscious aged patina, moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Casters

Set of 4 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company. Two sets of 4 available.

• 3 1/8 inch overall height.
• 2 1/2 inch wheels with 1 inch face.
• 2 3/4 inch x 3 3/4 inch mounting plates.
• Great operational condition.
• Gently refurbished- soaked in degreaser and factory grime and loose rust scrubbed away, moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Casters

1940s’ set of 6 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company.

• 3 3/8 inch overall height
• 2 1/2 inch wheels with 1 1/8 inch face
• 2 3/4 inch x 3 3/4 inch mounting plates

Great operational and structural condition with rustic, as-found patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Casters

1950s’ set of 4 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Casters

1930s’ set of 4 heavy duty industrial casters with an aged patina- the iconic Model 361 by Bassick Caster Company.

• 3 3/4 inch overall height
• 3 inch wheels with 1 1/8 inch face
• 3 1/8 inch x 4 1/8 inch mounting plates

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Furniture Casters

Freshly cleaned and refurbished, here's a set of four casters in rare, double wheel design. Late 1800s’ Model #3 by the Phoenix Caster Company of Indianapolis, IN. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces. Small circular mounting plate

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!