Black Casters With Brakes For Industrial Kitchen Island

Set of 4 heavy duty swivel casters with brakes. Cast iron wheels in steel forks with black enamel finish.

• 7 1/2 inch overall height (193mm)
• 6 inch wheels with 2 inchface (150 x 50mm)
• 4 x 4 1/2 inch mounting plate (100mm x 115mm)
• 600 lb load rating per caster (272 kgs)
• Each caster weighs over 8 lbs.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Furniture Stem Casters

Set of 1800s’ cast iron casters in rare, double wheel design! Super-rare stem model is ideal for secure mounting to thin furniture legs. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces. Model No.51 by Payson Manufacturing Company of Chicago, IL. Please note that circular holes in mounting plate do not function due to inaccessability from the bottom of the caster; stem is only aspect that would hold caster in place on furniture.

• Will raise your piece 2 1/2 inches
• 1 7/8 inch diameter wheels in 2 1/2 inch wide forks
• 2 1/8 inch circular mounting plates with 1 1/2 inch long, 3/8 inch wide stems

Great operational and structural condition. Scoured with power wire brushes to remove thick oxidation, soaked indegreaser, then hand scrubbed to remove dirt and grime, leaving an aged patina. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Large Antique Furniture Casters

Antique set of swivel caster legs. Large hardwood wheels in iron forks swivel in thick cast iron sleeve brackets. Circa 1880s.

• Will raise your piece 6 3/4 inches
• 3 inch diameter, 3/4 inch wide wheels
• 3 x 5 inch mounting plates
• Includes new wood mounting screws

Good condition. Great operational condition with wheel assemblies swiveling beautifully in sleeves; wheels spin easily. Cosmetically, original black painted finish shows minor wear. Structurally, wood does show shrinkage cracks, but seems sound and sturdy due to hardwood, but I would not suggest using on a piece weighing over 200 lbs.; see close-up.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Large Antique Heavy Duty Furniture Stem Casters

Antique set of swivel casters of thick cast iron with brown ceramic wheels. Exceptionally rare, large size. Small circular mounting plate and thick stem make these ideal for secure mounting to slim table legs. Made in England, circa 1880s.

• Will raise your piece 3 3/8 inches
• 2 1/4 inch diameter, 1 3/16 inch wide wheels
• 2 1/4 inch diameter mounting plates with 1 3/4 inch long, 7/8 inch diameter stems
• Includes new wood mounting screws

Exceptional condition, looking to have received only very gentle use! Great operational condition with wheel assemblies swiveling beautifully in mounting plate stems; wheels roll easily. Cosmetically, original black painted finish shows extremely minor wear. Ceramic wheels show light wear to face; two wheels each show a shallow chip at the hub on one side- see close-up.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Large Antique Heavy Duty Furniture Stem Casters

Antique set of swivel casters with extra-thick brass (plated?) forks and golden brown ceramic wheels. Exceptionally rare, large size. Small circular mounting plate and thick stem of cast iron make these ideal for secure mounting to slim table legs. Made in England by Hopkins & Son, circa 1890s.

• Will raise your piece 3 3/8 inches
• 2 1/2 inch diameter, 1 1/8 inch wide wheels
• 2 1/4 inch diameter mounting plates with 1 5/8 inch long, 3/4 inch diameter stems
• Brass circular cup accommodates a 2 1/8 inch diameter furniture leg, or pops off for no size restrictions
• Includes new wood mounting screws

Exceptional condition, looking to have received only very gentle use! Great operational condition with wheel assemblies swiveling beautifully in mounting plate stems; wheels roll easily. Cosmetically, brass finish shows minor wear and oxidation; ceramic wheels show very light wear to face, but one wheel has a chip (see last photo).

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Large Antique Heavy Duty Furniture Stem Casters

Antique set of heavy duty swivel casters with extra-thick brass (plated?) forks and black wheels- unsure if they are black porcelain or glass. Exceptionally rare, large size. Small circular mounting plate and thick stem of cast iron make these ideal for secure mounting to slim table legs. Made in England, circa 1890s.

• Will raise your piece 3 1/4 inches
• 2 3/8 inch diameter, 1 1/16 inch wide wheels
• 2 inch diameter mounting plates with 1 5/8 inch long, 13/16 inch diameter stems
• Brass circular cup accommodates a 2 inch diameter furniture leg, or pops off for no size restrictions
• Includes new wood mounting screws

Very good condition, having been washed to remove dirt and grime; moving parts lubricated. Great operational condition with wheel assemblies swiveling beautifully in mounting plate stems; wheels roll easily. Cosmetically, brass appears to have been painted black ages ago, which has now worn; wheels show normal wear to face with no chips or cracks.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Cast Iron Industrial Furniture Casters

Refurbished set of four cast iron casters. Made before ball bearings were a thing, a raceway of disk bearings allows wheel assembly to swivel on the mounting plate. Unmarked. Circa 1870s. New wood mounting screws included.

• Will raise your piece 1 7/8 inches
• 1 1/4 inch diameter, 3/4 inch wide wheels
• 1 3/4 x 2 3/16 inch mounting plates

Great operational, structural and cosmetic condition. Refurbished- scoured with power wire detailing brushes to remove grime and rust, soaked in degreaser, then hand scrubbed with wire brushes, leaving a luscious natural iron patina. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Cast Iron Industrial Furniture Casters

Refurbished set of four cast iron casters. Made before ball bearings were a thing, a raceway of disk bearings allows wheel assembly to swivel on the mounting plate. Model No. 183 by Payson Manufacturing Company of Chicago, circa 1890. New wood mounting screws included.

• Will raise your piece 1 7/8 inches
• 1 1/4 inch diameter, 5/8 inch wide wheels
• 1 5/8 x 2 1/4 inch mounting plates

Great operational, structural and cosmetic condition. Refurbished- scoured with power wire detailing brushes to remove grime and rust, soaked in degreaser, then hand scrubbed with wire brushes, leaving a luscious natural iron patina. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Cast Iron Industrial Furniture Casters

Refurbished set of four cast iron casters. Made before ball bearings were a thing, a raceway of disk bearings allows wheel assembly to swivel on the mounting plate. By M. B. Schenck & Company of Meriden, Connecticut with patent date of May 17, 1877. New wood mounting screws included.

• Will raise your piece 1 7/8 inches
• 1 1/4 inch diameter, 5/8 inch wheels
• 1 5/8 x 2 1/8 inch mounting plates

Great operational, structural and cosmetic condition. Refurbished- scoured with power wire detailing brushes to remove grime and rust, soaked in degreaser, then hand scrubbed with wire brushes, leaving a luscious natural iron patina. Moving parts lubricated and ready for installation.

Interestingly, Mr. Schenck was a supporter of presidential candidate Lincoln. He served for the duration of the Civil War, and voted for Lincoln a second time by sending his ballot home from the war. He started his caster company shortly after returning home. Thank you for your service, Mr. Schenck!

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Vintage Industrial Furniture Stem Casters

Set of 1800s’ stem casters in rare, double wheel design! Designed with narrow mounting plate and stem for thin furniture legs. Wheel assembly swivels on stem base.

• Will raise your piece 1 3/4 inches
• 1 1/4 inch diameter wheels in 1 7/8 inch wide forks
• 1 1/2 inch long, 5/16 inch wide stems

Great operational and structural condition. Scrubbed clean with wire detailing brushes, leaving a luscious aged patina. Moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Industrial Furniture Stem Casters With Brakes

Set of four stem casters- three with brake, one without. Hard rubber wheels to be kind to your flooring. Ball bearing swivel mechanism. Diamond Arrow Brand by Bassick Caster Company, circa 1960s.

• Will raise your piece 3 1/2 inches
• 3 inch diameter, 3/4 inch thick wheels
• 1 7/8 inch long, 7/16 inch diameter grip ring stems

Great operational condition. Metal shows aged/stained/discolored patina. Wheels show wear. Cleaned- soaked in degreaser and scrubbed of dirt and grime.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Shop antique and vintage furniture stem caster set with brakes for your coffee table, cabinet or furniture restoration project. Refurbished industrial furniture caster wheels.

Vintage Industrial Stem Furniture Casters With Brakes

Set of 4 casters with stem attachment; ideal for narrow furniture legs. Rubber wheels to be kind to your flooring. Side brake. Ball bearing swivel mechanism. New old stock; shows minor grime from years of factory storage.

• Will raise your piece 3 inches
• 2 1/2 inch diameter, 7/8 inch thick wheels
• 1 3/8 inch long, 7/16 inch diameter stems
• Great operational condition

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Glass Furniture Stem Casters

Ultra-rare set of 4 LARGE furniture casters with luscious, extra-thick clear glass wheels. Original swivel sleeves (extremely rare; it usually takes me years of searching to find). Faultless Caster Company of Nebraska City, Nebraska, dated November 8th, 1892.

• Will raise your piece 3”
• 2 1/2" diameter, 1 1/8" wide wheels
• 2 1/4" long, 9/16" wide sleeves

Great condition. Forks do show finish wear; sleeves show oxidation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Art Deco Furniture Casters

Still in their original 1930’s cardstock package, here’s a set of 4 swivel furniture casters. Small mounting plate to fit narrow furniture legs. Steel forks with antique bronze finish. Black rubber wheels to be kind to your flooring. Ball bearing swivel mechanism. Unused, new old stock- each caster wrapped in tissue. Diamond Arrow brand by Bassick Company of Bridgeport, Connecticut.

• 2 5/8 inch overall height
• 2 inch diameter, 3/4 inch wide wheels
• 1 1/8 x 2 inch mounting plates
• Includes new wood mounting screws

Pristine operational, structural and cosmetic condition. Box shows wear and aging.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Stacey's Kitchen Island Project

Check out this ultra-cool kitchen island- a vintage furniture piece reimagined by client Stacey of Los Angeles, CA. Looks great and quite fun! Obviously, Stacey is very imaginative. Am sure this will be a focal point of the kitchen.

Stacey used my 5-inch tall industrial casters with brakes…my most popular caster. She writes “The casters are fantastic. Thanks.”

The casters are heavy duty- cast iron wheels with black enamel finish and steel forks with handcrafted worn black painted finish. Available with brakes and wood mounting screws.

Thanks for sharing, Stacey!

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Cast Iron Industrial Furniture Casters

Refurbished set of four swivel casters- very heavy duty for their small size due to thick cast iron, high quality construction, and wide wheel. By M. B. Schenck & Company of Meriden, CT, dated to the 1880s. New wood mounting screws included.

• Will raise your piece 2 3/8 inches
• 2 x 2 5/8 inch mounting plates

Near pristine condition- excellent cosmetic and operational condition, but does show a small chipped area on the wheel hub (see highlighted area in close-up); I guarantee this will never be an issue unless being used for extremely heavy duty utilitarian use. Scoured with power wire brushes to remove all rust, hand washed, moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Furniture Stem Casters

Set of 4 antique swivel stem furniture casters. Exceptionally rare double-wheel design of cast iron with hardwood wheels to be kind to your flooring. Small circular mounting plate and thick stem make these ideal for secure mounting to slim table legs. Engineered to swivel via two small metal wheels built into the wheel assembly which roll against the circular mounting plate- a marvel of early American Industrial Age engineering. Made by M. B. Schenck & Company of Meriden, CT; marked with patent dates of 1877 to 1881.

• Will raise your piece 2 1/8 inches.
• 1 5/8 inch diameter mounting plates with 1 3/16 inch long, 1/2 inch diameter stems
• Includes new wood mounting screws

Refurbished. Great operational, structural and cosmetic condition. Scoured with power wire brushes to remove all oxidation, soaked in degreaser and scrubbed again. Polyurethane finish applied to wheels. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Furniture Stem Casters

Set of 4 antique swivel casters- Model No. 186 by Payson Manufacturing Company of Chicago, dated November 22, 1881. Exceptionally rare, large size. Cast iron with hardwood wheels to be kind to your flooring. Small circular mounting plate and thick stem make these ideal for secure mounting to slim table legs.

• Will raise your piece 2 1/4 inches.
• 1 7/8 inch diameter mounting plates with 1 1/8 inch long, 1/2 inch diameter stems
• Includes new wood mounting screws

Refurbished. Great operational, structural and cosmetic condition. Scoured with power wire brushes to remove all oxidation, soaked in degreaser and scrubbed again. Polyurethane finish applied to wheels. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Furniture Stem Casters

Refurbished set of 4 swivel furniture casters- cast iron with small circular mounting plate with stem make these ideal for slim table legs. Rare double wheel design. Made by Payson Manufacturing of Chicago, IL, dated May 1, 1877. New wood mounting screws included.

• Will raise your piece 2 inches
• 1 1/4 inch diameter wheels in 2 inch wide forks
• 1 5/8 inch diameter mounting plates with 1 3/8 inch long, 7/16 inch diameter stems

Great operational, structural and cosmetic condition. Refurbished- scoured with power wire brushes to remove thick rust, soaked in degreaser and scrubbed to remove dirt and grime. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Handcrafted Industrial Bar Cart

Check out this ultra-cool bar cart handcrafted by Iron Anarchy client Keith of Ligonier, PA for his daughter’s 21st birthday. Beautifully executed! Obviously Keith is very talented. Am sure this will be admired by all of his daughter’s guests and cherished forever.

Keith used my 4-inch tall industrial casters with brakes…my most popular caster. He writes “The casters were perfect. I will be buying again. Thank you.”

The casters are heavy duty- cast iron wheels with black enamel finish and steel forks with handcrafted worn black painted finish. Available with brakes and wood mounting screws.

Thanks for sharing, Keith!

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!