Black Rubber Stem Furniture Casters With Brakes

Set of four stem casters- two with brake, two without. Rubber wheels to be kind to your flooring. Ball bearing swivel mechanism. Worn black painted finish. Designed for bolting to a piece, but also offered for those with narrow furniture legs without room for a mounting plate- simply drill a slightly wider hole than the stem, then slide it in.

• Will raise your piece 3 3/4 inches
• 3 inch diameter, 1 inch thick wheels
• 1 inch long, 3/8 inch diameter threaded stems (includes nuts)

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Casters, Vintage Industrial Caster Wheels

1900s’ set of 4 industrial swivel casters in an Art Deco style. Unused new old stock! Two concentric ball bearing raceways to better handle both vertical and horizontal stresses. Model #6 by the American Caster & Manufacturing Company of Hamilton, OH…later to become Hamilton Caster & Manufacturing Company in the 1920s.

• Will raise your piece 3 inches
• 1 3/4 inch diameter, 7/8 inch wide wheels
• 2 x 3 inch mounting plates
• Includes wood mounting screws

Pristine operational, structural and cosmetic condition. Scoured with power wire brushes to remove light dirt, leaving a luscious aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Stem Casters

1920s’ set of 4 heavy duty swivel stem casters. Thick cast iron wheels in steel forks. Ball bearing swivel mechanism under top plate. Although the threaded stem was designed to be bolted to a factory cart, today it’s ideal for mounting to slim table legs (an extremely rare configuration for such a heavy duty antique caster). By The Colson Company of Elyria, Ohio.

• Will raise your piece 4 1/2 inches

• 3 1/2 inch diameter, 1 1/4 inch wide wheels

• 2 inch long, 3/4 inch diameter stem on 2 5/8 inch diameter mounting plate

Great structural and operational condition. Refurbished- soaked in degreaser and scrubbed with wire brushes to remove thick factory grime, leaving a clean, but aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Caster Wheels

Set of 4 heavy duty cast iron casters. Rigid style (roll back and forth; not swiveling). Khaki green wrinkle painted finish, so possible WWI era.

• Will raise your piece 3 inches
• 2 1/2 inch diameter, 5/8 inch wide wheels
• 1 1/8 x 4 inch mounting area with 2 mounting holes

Great structural and operational condition. Cleaned- soaked in degreaser, then scrubbed, leaving clean, but very aged patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Kitchen Island Casters

Refurbished set of four large swivel casters in rare double-wheel design- Rol-Ezy-Chief 300 by Currie Manufacturing Company of Chicago, IL, dated February 12, 1924. Extra heavy duty thick cast iron.

• 4 1/2 inch overall height
• 3 inch diameter wheels
• 3 3/4 inch wide forks
• 2 7/8 inch x 4 3/8 inch mounting plates

Great operational, structural and cosmetic condition. Scoured with power wire brushes to remove all oxidation; soaked in degreaser and scrubbed to remove all factory grime. Moving parts lubricated and ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Caster Wheels

Set of 4 heavy duty swivel casters of thick steel. Model 100-3 by Faultless Caster Company, USA.

• 3 3/4 inch overall height
• 3 inch diameter, 1 1/8 inch wide wheels
• 3 1/8 x 4 1/8 inch mounting plates

Great operational and structural condition. Soaked in degreaser, then hand scrubbed to remove dirt and grime, leaving a clean, aged patina. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Kitchen Island Casters

Set of four LARGE, extra heavy duty swivel casters by Service Caster & Truck Company of Albion, MI, dated 1917. Great Art Deco styling! Extra thick cast iron. Two concentric ball bearing raceways to better handle both vertical and horizontal stresses for optimum performance. These are what you need for that kitchen island project!

• 5 1/2 inch overall height
• 4 inch diameter, 1 1/2 inch wide wheels
• 4 x 5 inch mounting plates
• 7 lbs each

Great operational and structural condition. Refurbished- scoured with power wire brushes to remove the bulk of rust, and washed, leaving a luscious aged patina, moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Casters

Set of 4 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company. Two sets of 4 available.

• 3 1/8 inch overall height.
• 2 1/2 inch wheels with 1 inch face.
• 2 3/4 inch x 3 3/4 inch mounting plates.
• Great operational condition.
• Gently refurbished- soaked in degreaser and factory grime and loose rust scrubbed away, moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Heart Spoke Iron Wheels

Ultra-rare pair of late 1800s’ cast iron cart wheels with a heart-shaped spoke design.

5 1/2 inch diameter. 1 inch wide tread. 3/8 inch axle bore.

Strong and sturdy structural condition. As-found patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Kitchen Island Caster Wheels

Set of four LARGE cast iron industrial casters. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces. Marked HZM Co.; I’ve never heard of this company before, nor seen a set like these in the 12 years of specializing in antique industrial casters, so these must be exceedingly rare. Circa 1880s.

• 4 inch overall height
• 3 inch diameter wheels in 5 inch wide wheel assembly
• 3 1/2 inch square mounting plates
• Almost 5 lbs each

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Casters, Vintage Industrial Caster Wheels

Set of four cast iron industrial casters in rare double-wheel design- Model No.7 by Phoenix Caster Company of Indianapolis, IN, circa 1890-1910. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces.

•3 1/4 inch overall height
• 2 1/4 inch diameter wheels in 3 inch wide wheel assembly
•2 3/8 x 3 3/8 inch mounting plates
•Almost 2 lbs each

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Casters, Vintage Industrial Caster Wheels

Set of four cast iron industrial casters in rare double-wheel design- Model No.7 by Phoenix Caster Company of Indianapolis, IN, circa 1890-1910. Swiveling and self-leveling- wheel assembly tilts from side to side, keeping wheels in contact with uneven surfaces.

• 3 1/4 inch overall height
• 2 1/4 inch diameter wheels in 3 inch wide wheel assembly
• 2 3/8 x 3 3/8 inch mounting plates
• Almost 2 lbs each

Great operational and structural condition with as-found dirty/rusty/grimy patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Industrial Casters

1940s’ set of 6 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company.

• 3 3/8 inch overall height
• 2 1/2 inch wheels with 1 1/8 inch face
• 2 3/4 inch x 3 3/4 inch mounting plates

Great operational and structural condition with rustic, as-found patina.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Furniture Casters, Vintage Industrial Caster Wheels

1880s' set of four cast iron swivel casters- model No. 186 by Payson Manufacturing Company of Chicago, IL. They retain most of their original goldtone painted finish (very rare). New wood mounting screws included.

• 2 3/4 inch overall height
• 2 inch diameter, 7/8 inch wide wheels
• 2 1/8 x 3 1/8 inch mounting plates

Near pristine operational, structural and cosmetic condition, looking as though they received very little use and have been extremely well cared for over the past 140 years. Carefully cleaned to remove loose rust, leaving a luscious aged patina. Moving parts lubricated.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Casters, Vintage Industrial Caster Wheels

Late 1800s' set of four cast iron swivel casters- model No.188 by Payson Manufacturing Company of Chicago.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Casters, Vintage Industrial Caster Wheels

Refurbished 1890s' set of four cast iron swivel casters- model No.188 by Pioneer (later to become Payson Manufacturing Company of Chicago?). Wood mounting screws included.

• 3 3/4 inch overall height
• 2 3/8 inch diameter, 1 1/4 inch wide wheels
• 3 inch x 4 1/4 inch mounting plates (mounting holes 1 1/2 inch and 3 1/4 inch on center)

Near pristine! Outstanding operational, structural and cosmetic condition as though they saw little use and were so well protected for 130 years. Scoured with power wire brushes to remove light rust, soaked in degreaser, then hand scrubbed of dirt and grime, leaving a luscious, clean patina. Moving parts lubricated. Ready for installation.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Stem Casters

1940s’ set of 4 heavy duty swivel casters. Thick cast iron wheels in steel forks. Ball bearing swivel mechanism under top plate. Stem mounting is ideal for slim table legs (an extremely rare configuration for such a heavy duty antique caster).

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Casters

1950s’ set of 4 heavy duty industrial casters with an aged patina- the iconic Model 261 by Bassick Caster Company.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Antique Industrial Kitchen Island Caster Wheels

Super rare 1930s’ Art Deco style set of 4 extra heavy duty swivel casters of extra thick cast iron. Corner mounting plates could be placed on inside or outside corners of a furniture leg or cabinet base, depending on your preference. By Bond Foundry of Manheim, PA.

• Will raise your piece 5 inches
• 3 1/2 inch diameter, 1 1/2 inch wide wheels
• Corner mounting plate measures 2 inches tall, 2 inches on each side
• Each weighs 6 lbs.

Great structural and operational condition; as-found aged patina with oxidation and worn paint.

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!

Vintage Cast Iron Casters

1930s’ set of 4 heavy duty industrial casters with an aged patina- the iconic Model 361 by Bassick Caster Company.

• 3 3/4 inch overall height
• 3 inch wheels with 1 1/8 inch face
• 3 1/8 inch x 4 1/8 inch mounting plates

Check them out on my website, along with all my other antique and vintage caster offerings. And be sure to follow Iron Anarchy on Instagram for all the latest antique and vintage industrial caster offerings!